OPPO-HA-1 specifications

General
Dimensions (W x H x D)	10.0 x 3.6 x 13.1 inches, 254 x 91 x 333 mm
Mass	13.0 lbs, 5.9 kg
Power Supply	AC 110-120 V~ / 220-240 V~, 50/60 Hz auto-sensing
Trigger Input	3.5 V – 15 V, 10mA minimum
Trigger Output	12 V, 100 mA maximum
Operating Temperature	41 °F - 95 °F, 5 °C - 35 °C
Operating Humidity	15% - 75% No condensation
Recommended Headphone Impedance	32 ohm – 600 ohm
Balanced Headphone Jack Output (XLR-4) Pin order	1: L+, 2: L-, 3: R+, 4: R-, Shell: GND
6.35 mm Headphone Jack Output Pin order	Tip: L, Ring: R, Sleeve: GND
XLR Balanced Audio Input
Input Impedance	15k ohm
Maximum Input Level	18 Vrms, +27.3 dBu (0 dBu = 0.775 Vrms)
RCA Stereo Audio Input
Input Impedance	10k ohm
Maximum Input Level	9 Vrms, +21.3 dBu (0 dBu = 0.775 Vrms)
Coaxial, Optical, AES/EBU Digital Inputs
Input Format	Stereo PCM
Sampling Frequencies	44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,176.4 kHz, 192 kHz
Word Length	16-bit, 24-bit
USB DAC Audio Input (USB B Type)
Input Format	Stereo PCM, Stereo DSD (DoP v1.1 or native)
PCM Sampling Frequencies	44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz
PCM Word Length	16-bit, 24-bit, 32-bit
DSD Sampling Frequencies	2.8224 MHz (DSD64), 5.6448 MHz (DSD128),11.2896 MHz (DSD256, native mode only)
Profile	USB 2.0, USB Audio 2.0
Mobile USB Audio Input (USB A Type)
Input Format	Stereo PCM
PCM Sampling Frequencies	44.1 kHz, 48 kHz
Profile	USB 2.0, USB Audio 2.0
VBUS Power Output	+5 V, 2.1 A
Bluetooth Audio Input
Standard	Bluetooth 2.1+EDR
Profile	iAP, SPP, AVRCP, A2DP
Audio Transmission Format	SBC, aptX

DAC Performance Specifications
Specification	XLR Output	RCA Output
Output Level	4.6 ± 0.3 Vrms	2.3 ± 0.3 Vrms
Frequency Response (Tested with -10 dBFS / 384 kHz)	10 Hz – 170 kHz (+0/-3 dB) 20 Hz – 20 kHz (+0/-0.07 dB	10 Hz – 170 kHz (+0/-3 dB) 20 Hz – 20 kHz (+0/-0.07 dB)
THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz)	< 0.00056% (< -105 dB)	< 0.00056% (< -105 dB)
Channel Separation	> 105 dB	> 105 dB
Signal-to-Noise Ratio (A Weight, 20 Hz – 20 kHz)	> 115 dB	> 113 dB
Dynamic Range (1 kHz -60 dBFS, A Weight, 20 Hz – 20 kHz)	> 115 dB	> 113 dB

(Test condition: USB DAC input in Home Theater Bypass mode and the volume knob at Max position.)

Pre-amplifier Performance Specifications
Specification	XLR Input – XLR Output	RCA Input – RCA Output
Rated Output Level	4.6 Vrms	2.3 Vrms
Frequency Response	10 Hz – 200 kHz (+0/-2 dB) 20 Hz – 20 kHz (+0/-0.04 dB)	10 Hz – 200 kHz (+0/-2 dB) 20 Hz – 20 kHz (+0/-0.04 dB)
THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz)	< 0.00056% (< -105 dB)	< 0.00071% (< -103 dB)
Channel Separation	> 120 dB	> 110 dB
Signal-to-Noise Ratio(A Weight, 20 Hz – 20 kHz)	> 110 dB	> 105 dB
Dynamic Range(1 kHz -60 dB, A Weight, 20 Hz – 20 kHz)	> 120 dB	> 115 dB
Maximum Gain (100 mVrms input)	6 dB	6 dB

(Test condition: Volume knob at Max position and an input signal to drive the output to the rated output level.)

Headphone Amplifier Performance Specifications
Specification	Condition	XLR Input - Balanced Output	RCA Input - 6.35 mm Output
Maximum Output Power (Per Channel)	Into 600 Ohm	2400 mW	600 mW
	Into 32 Ohm	3000 mW	3500 mW
Rated Output Power(Per Channel)	Into 600 Ohm	800 mW	200 mW
Rated Output Power(Per Channel)	Into 32 Ohm	2000 mW	500 mW
Frequency Response		10 Hz – 200 kHz (+0/-1 dB) 20 Hz – 20 kHz (+0/-0.04 dB)	10 Hz – 200 kHz (+0/-1 dB) 20 Hz – 20 kHz (+0/-0.04 dB)
THD+N at 1k Hz (A Weight, 20 Hz – 20 kHz)	Rated Power	< 0.0018% (< -95 dB)	< 0.0056% (< -85 dB)
THD+N at 1k Hz (A Weight, 20 Hz – 20 kHz)	50 mW	< 0.001% (< -100 dB)	< 0.0022% (< -93dB)
Channel Separation		> 120 dB	> 90 dB
Signal-to-Noise Ratio (A Weight, 20 Hz – 20 kHz)		> 111 dB	> 111 dB
Dynamic Range (1 kHz -60 dB, A Weight, 20 Hz – 20 kHz)		> 120 dB	> 115 dB
Output Impedance		0.5 Ohm	0.7 Ohm

(Test condition: Volume knob at Max position and an input signal to drive the output with 600 Ohm loads to the rated output power, unless otherwise noted.)

"Made for iPod", "Made for iPhone", and "Made for iPad" mean that an electronic accessory has been designed to connect specifically to iPod® , iPhone®, or iPad®, respectively, and has been certified by the developer to meet Apple performance

standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

iPad, iPhone, iPod and iPod touch® are trademarks of Apple Inc., registered in the U.S. and other countries.

Compatible iPod/iPhone/iPad Models
- USB works with iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPad (4th generation), iPad mini, iPod touch (5th generation).
- Bluetooth technology works with iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPad (4th generation), iPad mini, and iPod touch (5th generation).

All trademarks are the property of their respective owners.